Author Topic: Furniture  (Read 1570 times)

0 Members and 1 Guest are viewing this topic.


  • Guest
« on: December 16, 2010, 01:37:53 PM »
Furniture Medic is the national leader in providing expert furniture repair on-site, in your home or office.  Our advanced techniques and patented materials restore furniture and wood fixtures to like new condition.

Furniture Medic provides a cost savings alternative to replacing your damaged furniture.  Whether in your home or at the office, call on Furniture Medic to solve all your furniture restoration and repair needs.  Guaranteed satisfaction. Please, please, please do not "strip" your furniture just to remove wax buildup. Understand that "stripping" your furniture removes its original finish all the way down to the bare wood. This is not good for your furniture and if your treasured piece is an antique, "stripping" and refinishing will decrease its monetary value by as much as half. Would you remove the paint finish on your car because it was too hard to remove the dried turtle wax on the surface? The same principle applies here.
It is safer for your wood finish to have coating of wax than to be "stripped" of its finish altogether. In fact it's preferable. A good wax coating actually protects a wood's finish from many household pollutants such as cigarette smoke. And in environments where there is a lack of humidity, the wax will also protect the wood from splitting.
Also understand that wax buildup is a sign that your furniture's finish needs a proper cleaning, not a "stripping". Wax buildup is noticeable when a wax-base or oil-base furniture polish is applied over and over again without a proper buffing of its surface. The furniture surface will look dull. It might even feel slightly sticky to the touch. There are two methods to try to remove excess build up. One is to actually buff the piece with a soft lint-free rag. Old yet clean cloth diapers are perfect (if you can find them). First wipe off any excess dust then buff in a circular motion with some pressure applied to the surface. Keep doing this until the surface becomes less dull and sticky. If your cloth gets dirty, change to a clean one. Remember you want to remove and smooth out the excess wax on the furniture, not reapply it. Finish by buffing again with another clean cloth with the grain of the wood. If this is done properly, you will feel that your arms have gotten a good workout. Don't be afraid to use a little elbow grease.visit this

Offline rick11

  • *
  • Posts: 65
  • Reputation : 0
  • Gender: Male
  • We Love Nepal
    • webdesigning
Re: Furniture
« Reply #1 on: January 04, 2013, 11:48:12 AM »
Furniture can be a product of design and is considered a form of decorative art. It can be made from many materials, including metal, plastic, and wood. Furniture can be made using a variety of woodworking joints which often reflect the local culture.

furniture at work complaints


Host By::Love Nepal Network SMF 2.0.2 | SMF © 2011, Simple Machines Our Privacy Policy & Terms of Use