Author Topic: All About Nokia Secrets  (Read 2060 times)

0 Members and 1 Guest are viewing this topic.

Offline *****

  • *
  • Posts: 205
  • Reputation : 3
All About Nokia Secrets
« on: October 04, 2007, 08:42:18 AM »
Scroll Down to view Specific Model Numbers!!!!



*** WARNING: Using secret codes may be harmful to your phone and result in disabling or worse. Use these codes at your own discretion, we accept no responsiblility for blocked pones while using these codes!!!

IMEI Number
*#06# Cells Identity Code (IMEI = International Mobile Equipment Identity)
XXXXXX XX XXXXXX X
TAC FAC SNR SP
TAC = Type Approval Code (first 2 digits = country code of the approval-country )
FAC = Final Assembly Code: (01,02 = AEG)
(10,20 Nokia)
(40,41,44 Siemens)
(30 Ericsson)
(50 Bosch)
(51 Sony,Siemens,Ericsson)
(60 Alcatel)
(65 AEG)
(70 Sagem)
(75 Dancall)
(80 Philips)
(85 Panasonic)
SNR = Serial Nr.
SP = Spare (always "0")

Software Version
*#0000# shows the software version
Signal Processing
*3370# - Enchanced full Rate Codec (EFR) activation. It will automatically restart.
#3370# - Enchanced full Rate Codec (EFR) deactivation
*4720# - Half Rate Codec activation. It will automatically restart.
#4720# - Half Rate Codec deactivation
Enchanced Full Rate will give you much better sound quality when you enable it. The new Enhanced Full Rate CODEC adopted by GSM uses the ASELP (AlgebraicCode Excitation Linear Prediction) compression technology. This technology allows for much great voice quality in the same number of bits as the older Full Rate CODEC. The older technology was called LPC-RPE (Linear Prediction Coding with Regular Pulse Excitation). Both operate at 13 kilobits.(but you take up more space on the network, so they can charge you more) - Talk-time is reduced with about 5%



Sim Clock Stopping
*#746025625#
[*#sim0clock#]
Checks if the sim clock can be stopped. Sim clock stop is a kind of stand-by mode which will save battery time. This code doesn't work with software version 4.59.
It will tell you if it can be stopped or not.


Warrenty Menu
*#92702689# takes you to a secret menu with 6 choices:
[*#war0anty#]
1. Displays Serial Number.
2. Displays the Month and Year of Manufacture (0997).
3. Displays (if there) the date where the phone was purchased (MMYY).
4. Displays the date of the last repairment - if found (0000).
5. Makes you capable of transferring user data if you have the gear for it.
6. Shows how long the phone has been used to talk. This counter is not reset by when you "clear timers" like the counters in the call register.


Bypass the SP lock With a Nokia 16xx/21xx/31xx/51xx/81xx
1. Insert SIM card of different provider.
2. Turn on the phone and press the UP VOLUME key for 3 sec.
Then release it and the phone says PIN CODE?
3. Press the "C" key.
4. Then Press * and wait until it disappears and appears again, then press * one more time and 04*PIN*PIN*PIN#


Nokia Speed Trap Detector Urban Legend spread by Nokia Engineers ;^)
The settings for radar speed traps detector. Your Nokia cell phone can be programmed to pick up radar speed traps, when programmed your cell phone picks up the radar and alerts you on the message alert tone. ( Doesn't work with Nokia 7110! )
1. Enter your menu
2. Select settings
3. Select security settings
4. Select closed user group
5. Select on
6. Enter 00000
7. Press ok
8. Clear back to normal, within a few seconds your phone will display a radar sign with five zero's next to it. It is now activated.
Unfortunately only Nokia phones have this function. The Cell Phone info display needs to be de-activated. Settings -> Phone Settings -> Cell Info display. Each time you turn off your phone, or even each time you loose contact with your carrier, you'll have to activate it again... It is done using steps 1 through 5 above, but the number (00000) will be already on the field as a default.

The James Bond Trick



If you short-circuit the left middle and right pins on the bottom of the phone with all connections touching each other, the Nokia software hangs! The profile "Headset" will be activated. Before you do this just activate the "Automatic Answer" in the headset profile and set the ringing volume to "Mute". Now you can use your phone for checking out what people are talking about in a room. Just place it under a table in a room and call it. The phone receives the call without ringing and you can listen to what people are saying! Network Monitor
There is a hidden menu inside your Nokia phone. If you want to activate it, you'll have to re-program some chips inside of your phone.
Check your software version. You can only continue if you have v4.33, v4.73 or v5.24.
Take apart the phone.
De-solder the EEPROM (ATMEL AT 24C64)
Read out the data with an EEPROM programmer and save it to a file (Backup)
If you have v.33 or v4.73, change the address "03B8" from "00" to "FF"
If you have v5.24 then change the address "0378" from "00" to "FF"
Write the new data to the EEPROM and solder it back to the phone
Power on your phone and you should have "Netmonitor" enabled.
The Network Monitor gives you the following information:
Carrier number, MS RX Level in DBM, Received signal quality, MS TX power level, C1 (Path loss criterion, used for cell selection and reselection). The range is -99 to 99, RTL (Radio link timeout), Timeslot, Indication of the transmitter status, Information on the Network parameters, TMSI (Temporary Mobile Subscriber Identity), Cell identification (Cell ID, Number of cells being used), MCC (Mobile country code), MCN (Mobile network code), LAC (Location area code), Ciphering (On/Off), Hopping (On/Off), DTX (On/Off), Discard cell barred information.



Game Hacking with Blizzard



Get the file called the 'BlizzardN-GAGE.SIS' from IRC get in #mediaplace on Efnet (note: Downloading cracked/Hacked games is illegal unless you already own a copy of game)
The Blizzard Nokia N-Gage Installer.
1. Unpack Blizzard.sis file that you get from mIRC
2. Transfer the .sis file to your N-Gage
3. Get the .blz (N-gage ROM) from mIRC
4. copy the file to the root dir of your MMC (16MB MMC)Multimedia Card
5. Use the Blizzard application to unpack the .blz file
6. After unpacking the sonic icon should appeared in the MENU
7. Clicked sonic icon and it should work !



List of compatible games for the 3650,6600 and the N-gage that work:
[3650]
SonicN (v.2.5+)
Puyo Pop (v.2.5+)
[6600]
SonicN
Puyo Pop
Pandemonium
Tomb Raider
Super Monkey Ball
Tony Hawks Pro Skater
[N-Gage]
SonicN
Puyo Pop
Pandemonium
Tomb Raider
Super Monkey Ball
Tony Hawks Pro Skater
GSM Network Services Command Strings
When various network functions are selected via the cellphone's menu using the keypad, the cellphone automatically generates the corresponding GSM network command string and transmits it to the network. These commands can however be manually entered via the keypad.

Offline *****

  • *
  • Posts: 205
  • Reputation : 3
Re: All About Nokia Secrets
« Reply #1 on: October 04, 2007, 08:43:51 AM »
Nokia Codes..

Some Codes here... May work... May not wok...

Nokia Code function

* *3370# This Nokia code activates Enhanced Full Rate Codec (EFR) - Your Nokia cell phone uses the best sound quality but talk time is reduced my approx. 5%
* #3370# Deactivate Enhanced Full Rate Codec (EFR) .
* *#4720# Activate Half Rate Codec - Your phone uses a lower quality sound but you should gain approx 30% more Talk Time.
* *#4720# With this Nokia code you can deactivate the Half Rate Codec.
* *#0000# Displays your phones software version, 1st Line : Software Version, 2nd Line : Software Release Date, 3rd Line : Compression Type .
* *#9999# Phones software version if *#0000# does not work.
* *#06# For checking the International Mobile Equipment Identity (IMEI Number) .
* #pw+1234567890+1# Provider Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols).
Tips / undocumented functions:

- At the top of the main-menu and every folder, the keys 1 to 9 are shortcuts to the icons 1-9

- A shortcut on the left menukey in standby-mode will take more time to open than a shortcut on the right menukey. Reason: The left key is also used for the keylock so it shortly waits for pressing the * button.

- While writing text press and hold "#" to switch between Alpha mode and Number mode. You can also press a key long to insert its number.

- In standby-mode, press and hold 0 to launch your wap home page.

- If you have your keylock activated just press the on/off button to turn on your backlight to look at the time when it's dark without having to unlock the keypad.

- To keep the backlight on, run Torch (freeware), press and hold the Menu button and go somewhere else on the phone.

- To check your current firmware version simply type *#0000# in standby screen.

- To check your IMEI (International Mobile Equipment Identity) type *#06# in standby screen.

- To check your Bluetooth device address type *#2820# in standby screen.

- Start up in Safe Mode (no 'auto start' apps will be running): Hold down the pencil key when you turn on the phone and hold it on until you have to enter your PIN code.

- Format the phone memory by typing *#7370# in standby screen.

- In standby mode,
45# + <talk> dials the number on your sim in memory slot 45.
50# + <talk> dials slot 50 and so on.
*# 06 # Seriennummer/IMEI indicates (actually also a GSM is code - see further below)
-----------------------------------------------------
*# 0000 # SW version announcements (e.g. V3.42.1, 16-10-03, Nhl-10)
---------------------------------------------------------
*# 2820 # Bluetooth (BT) device address indicate
------------------------------------------------------------
xx # Directory quick access (xx = storage location and afterwards lozenge e.g. 24 #)
---------------------------------------------------
A/from key Short pressing for menu for switching between profiles
-------------------------------------------------------------------
Menu key Long pressing for "task manager" - switching between active programs (with "C" key programs can be terminated.)
------------------------------------------------------------------
Menu quick access Over in the menu e.g. to point 3.1 arrive simply 31 enter (if the third symbol a file is opened is for these and then in it started the first Programm/Icon).
---------------------------------------------------------------------
Autostart go around When switching on of the Handys on to the pin inquiry the key "ABC" (pin) comes the whole time keeps pressed - this is to ignore (allegedly) the autoinitialization programs.
------------------------------------------------------------------------
# Do not switch between different lines (AS)... goes e.g. with Austrian ONE Handys (see nose cunning). I could not try out however also, since I did not have 2 lines on the SIM map.
-------------------------------------------------------------------------
12345 ... is according to standard set the Nokia nokia-Sicherheitscode.
--------------------------------------------------------------------
0000 ... is according to standard those (with Vodafone windshield frame section) set 2te pin and that standard net code/password
With D1 the standard net code is the last 4 numbers of the card number without HLR e.g. 99999234-5/55 - > 2345
------------------------------------------------------------------------
0 - for a long time press If one the "0" in the main menue for a long time presses those homepage of the standard WAP connection is called.


MMC Card

Your files in MMC are stored in multiple (disk) blocks.
So if you format using 16K block, the space used will be 16K eventhough your file is just 1K.

If you buy MMC, it is usually preformatted with 16K block. Therefore alot of space is wasted as most installed program files are usually less than 2K.

You will need a card reader to do this:-

1. Connect card reader and copy all your files in the MMC to computer disk.
(Make sure you set the show all/hidden/os files to "on")
2. Do a format of the MMC using command line "format" and use the /A=size option.
Alternative, you can use the Disk Management in Adminstrative Tools to format.
Make sure you select FAT. For 256MB MMC, smallest block you can use is 4K, 128MB is 2K, 64Mb is 1K and 32MB is 512B.

(Note: You cannot use the phone "format MMC" to do this as the format just clear the allocation table and does not change the block size)

3. Copy back all files to MMC.

Now you will find that you will have more space.
256mb MMC got back 30+ mbs

Caution - starting from here the codes are "dangerous"

*#7370925538#
* # of res wallet # ... is to be deleted the code around the "wallet"! Input like normal telephone number (not in wallet code inquiry windows).
NOTE! Afterwards the "wallet" is empty, can again be put on however with new code.
-----------------------------------------------------------------
*# 7780 # The "original attitudes" and telephone re-establishes is again started (an appropriate inquiry and it follow before must the sicherheitscode be entered).
NOTE! Afterwards various "attitudes" are away - among other things these:
?1 Points of entrance (Provider dependent points of entrance and attitudes)
?2 Bluetooth attitudes
?3 Favorite
?4 Allocation of the two keys (beside Navi keys) in the main menue
?5 Profiles are "neglected" (as with distribution) - still there however new bell tones, etc. are...
?6 SMS/MMS/E Mail attitudes
?7 Logos and spielstaende (allegedly) also deleted...
Programs, calendars and contacts, etc. not changed...
Also the sicherheitscode remains.
This putting back goes also via menu under "attitudes - general - original telephone once.".
-------------------------------------------------------------------------
*# 7370 # Soft format: If the Handy (only telephone memory) formats, puts back the attitudes (see * to # 7780 #) and implements a software RESET. (however still another inquiry comes before.)
NOTE! If the Akku to 75% are loaded at least, Akku do not only accomplish during the procedure under any circumstances remove! The procedure takes some minutes (approx. 3-4), is absolutely waiting!
This is "only" a soft format... Hard format with "green, 3, *"... see below.
--------------------------------------------------------------------
Green, * 3 Hard format: If the Handy (only telephone memory) formats, puts back the attitudes (see * to # 7780 #) and implements a RESET.
NOTE! If the Akku to 75% are loaded at least, Akku do not only accomplish during the procedure under any circumstances remove! The procedure takes some minutes (approx. 3-4), is absolutely waiting!

Proceeding: Equipment switch off, which keep "green key" (take off) at the same time pressed, "*" and to "3" key and switch the equipment on (the keys thereby keep further pressed)... to "Formatting" on the display appears...
If that does not function, then equipment for 1 hour switch off, Akku so for a long time rausnehmen and again try.
"only" virtual the memory is generally cleared - genuine formatting can take place only in a Nokia service center, if the Fash is deleted there and/or new L.G. is installed.
Mixed * # 92702689 #, then switch - system menu off (goes with me not)

Offline *****

  • *
  • Posts: 205
  • Reputation : 3
Re: All About Nokia Secrets
« Reply #2 on: October 04, 2007, 08:44:43 AM »
The following code do not fold (with me also):
* EFR0 # (* 3370 #) EFR activate (EFR = Enhanced Full rate Coding - language optimization)
# EFR0 # (# 3370 #) EFR switch off
* HRC # (* 4720 #) HRC switch on (HRC = helped rate Coding - language compression)
# HRC0 # (# 4720 #) HRC switch off
----------------------------------------------------------------
SIM LOCK Simlock status query: (use "*" the key over "p,w" and "+" indications to enter)
# pw+ 1234567890 +1 # Provider LOCK status
# pw+ 1234567890 +2 # network LOCK status
# pw+ 1234567890 +3 # Country LOCK status
# pw+ 1234567890 +4 # Sim Card LOCK status
The code 1234567890 must be computed with a program e.g. SmartDCT4Calc and/or DCT 4 code Calculator from IMEI, etc....
Info. to Simlock: SIM LOCK makes it for the offerer/network carriers possible, subsidized (verguenstigte) Handys to offer. Thus one makes oneself if necessary punishable if one SIM LOCK deactivated - in addition the warranty can purged. I take over for it no adhesion or responsibility!
------------------------------------------------------------------------
GSM code ... should function at each Handy - however Netz(betreiber)abhaengig are... and "harmless"...
Generally applies: First enter code, "send" afterwards (< send green key > press) and one moment wait...
------------------------------------------------------------------
SMS Tipps To Tipps & cheat about SMS (with appropriate codes) are immediately in the FAQ list .
For example for the topic: SMS "retard" and/or deferred send, acknowledgment of receipt, reports...
----------------------------------------------------------------
Mark more simply To Tipps & cheat to the topic "mark" e.g. with SMS entrance.
Over simply to mark simply the "pin" (ABC key) hold some e.g. SMS and move then Jostick downward

Call number transmission * 31 # - { CLIR - Calling LINE identification Restriction switches on for the general call number transmission }
# 31 # - switch off the general call number transmission
# 31 # [ telephone number ] - with the next call suppress the own call number (thus temporary)
* 31 # [ telephone number ] - with the next call transfer own call number (thus temporary)
* # 31 # - status query (of call number transmission)
# 31 * [ telephone number ] - own call number show, although receiving station switched call number suppression on. (is not usually de-energised of the Netz(betreiber).)

* 30 # - switch { TIE-clip - Calling LINE identification presentation for the announcement on of the call number of the caller }
# 30 # - switch off
* # 30 # - status query

This also partly goes with 6600 via Men: Attitudes - calls - own No. send...

The following codes are not supported by most Netz(betreibern):
* # 76 # - announcement of the call number, under which one reached the calling (not its call number during rufumleitung!) { COLP - COonnected LINE identification presentation }
* 76 # - switch on
# 76 # - switch off

* # 77 # - announcement of the call number, under which the caller reached me (not my call number during rufumleitung meinerseits!) { COLR - COnnected LINE identification Restriction }
* 77 # - switch on
# 76 # - switch off

Call bypasses (call Forwarding) Bypass code (U):
U=21 always
U=61 retards
U=62 not attainable
U=67 occupies

U=61, 62, 67 can be parallel active

U=21 - > and then no more call signaling overwrites U=61,62 and 67!
Service code (D):
Not all nets support all services
D=10 language and fax (all calls)
D=11 only language
D=12 all data (speed/minutes)
D=13 only fax
D=14 DATEX j (active?)
D=15 teletex (active?)
D=16 only SMS
D=18 all data except SMS
D=19 all services except SMS
D=20 all services
D=21 all asynchronous services
D=22 all synchronous services
D=23 3.1 kHz GSM of language services
D=24 all synchronous POINT ton of POINT DATA inclusive. PADs
D=25 only data (all asynchronous POINT ton of POINT DATA inclusive. PADs)
D=26 DATA pack exchange on the left of inclusive. PADs
D=27 services thru PADs
D=29 12 Kbps digitally left

** U * [ goal call number ] * D # - bypass switch on
Input without * D means bypass of all services

Call bypasses (call Forwarding)
01.01.04 Bypass code (U):
U=21 always
U=61 retards
U=62 not attainable
U=67 occupie

** U * [ goal call number ] * D # - bypass switch on
Input without * D means bypass of all services

## U ** D # - switch bypass off (individual bypasses and service code)
Without ** D all services are switched off to bypasses
## 002 # (all bypasses for all service codes switch off)
## 004 # (switch off only U=61, 62, 67 and for all service codes - thus ", not attainable, nonacceptance "occupies)

* # U ** D # - status of the bypasses query:
Input without ** D queries all services and bypasses

Bypass in the speaking and/or fax box: Number in bypass procedure with D=11 and/or 13 enter
Goal call number (e.g. D2-Netz: +49,172 xxx) and Handynummer without preselection (if necessary 172 replaces) enter.

Tap: During switched on rufumleitung "with occupied" being able "to reject" calls by one the red key during "to ring" presses. The caller is then passed on to the goal call number of the occupying bypass (e.g. mailbox).
Type for waiting period during rufumleitung 61: ** 61 * [ goal call number ] * 11 * [ time in sec. (5 to 30) ] #

This also partly goes with 6600 via menu: Attitudes - rufumleitungen -...

Knock/stops/parks/faults Knocks is signaling a secondary call during a current discussion
* 43 # - switch on
# 43 # - switch off
* # 43 # - status query

This also partly goes with 6600 via menu: Attitudes - calls - knocking...

0 < sends > - reject while the discussion a knocking
1 < send > - discussion terminate, knocking discussion accept
certain discussion (y) terminate 1 (y) < send >
2 < sends > - discussion park, knocking discussion accept
certain discussion and new discussion leads 2 parks (y) < sends >

0 < sends > - caller the busy condition signal

This also partly goes with 6600 via menus existing during the discussion

Call barrier Possible only if bypass of the service code is switched off.
Check code (S):
S=33 all outgoing transmissions
S=331 outgoing abroad
S=332 outgoing abroad except home
S=35 all arriving transmissions
S=351 all arriving abroad

Special check codes (s) delete:
Switch off only in connection with the procedure
S=330 check code status outgoing & arriving transmissions switch off
S=333 check code status outgoing transmissions switch off
S=353 check code status arriving transmissions switch off
Service code (D):
Not all nets support all services
D=10 language and fax (all calls)
D=11 only language
D=12 all data (speed/minutes)
D=13 only fax
D=14 DATEX j (active?)
D=15 teletex (active?)
D=16 only SMS
D=18 all data except SMS
D=19 all services except SMS
D=20 all services
D=21 all asynchronous services
D=22 all synchronous services
D=23 3.1 kHz GSM of language services
D=24 all synchronous POINT ton of POINT DATA inclusive. PADs
D=25 only data (all asynchronous POINT ton of POINT DATA inclusive. PADs)
D=26 data packet exchange links incl. PADs
D=27 services thru PADs
D=29 12 Kbps digital link

CHECK SIM-LOCK

Note - If you bought your Nokia on UK Vodafone or UK Cellnet you do not need to check this because they both transmit on GSM900, and they don't lock the phones. However if you bought your phone on UK Orange or UK One2one your phone may be blocked. The reason is that they both transmitt on GSM1800. To make a call on GSM1800 you need what is known as a "Dual band" phone. A dual band phone is able to transmit on both GSM900 and GSM1800, so they lock the phones so you can't use it with any other network simcard. If you find that your phone is locked you can try different software to unlock it. (we havn't found one that works yet), or you can ask your service provider who will gladly exchange the 10 digit code for about ?35.

This is how to check the status of the 4 different locks. Aslo don't try entering the wrong number, because after 3 times it will block the phone for good.



There are 4 different locks on your Nokia phone.

COUNTRY-LOCK

NETWORK-LOCK

PROVIDER-LOCK

SIMCARD-LOCK

The code to read out the sim-lock status of your phone is



#PW+(MASTERCODE)+(Y)#

# = DOUBLE-CROSS

W = PRESS "*" THREE TIMES

P = PRESS "*" FOUR TIMES

+ = PRESS "*" TWO TIMES

MASTERCODE = 1234567890

Y = NUMBER 1 TO



THE JAMES BOND TRICK

If you short-circuit theleft middle and right pins on the bottom of the phone with all connections touching each other, the Nokia software hangs! The profile "Headset" will be activated. Before you do this just activate the "Automatic Answer" in the headset profile and set the ringing volume to "Mute". Now you can use your phone for checking out what people are talking about in a room. Just place it under a table in a room and call it. The phone receives the call without ringing and you can listen to what people are saying.
-----------------------------------------------------
Clock Stopping

To check weather your SIM Card supports clock stopping type-

*#746025625# (*#SIM0CLOCK#)
---------------------------------------------
To enter the service menu type-

*#92702689# (*#WAR0ANTY#)

Serial number (IMEI)

Production date (MM/YY)

Purchase date (MM/YY) You can only enter the date once.

Date of last repair (0000=No repair)

Transfer user data to another Nokia phone via Infra-Red


Code's for some older nokia phones

Offline *****

  • *
  • Posts: 205
  • Reputation : 3
Re: All About Nokia Secrets
« Reply #3 on: October 04, 2007, 08:45:14 AM »
Nokia code

These Nokia codes will work on most Nokia mobile phones, however we accept no responsibility of any kind for damage done to your phone whilst trying these Nokia secret codes.

Nokia code Code function
*3370# This Nokia code activates Enhanced Full Rate Codec (EFR) - Your Nokia cell phone uses the best sound quality but talk time is reduced my approx. 5%
#3370# Deactivate Enhanced Full Rate Codec (EFR)
*#4720# Activate Half Rate Codec - Your phone uses a lower quality sound but you should gain approx 30% more Talk Time
*#4720# With this Nokia code you can deactivate the Half Rate Codec
*#0000# Displays your phones software version, 1st Line : Software Version, 2nd Line : Software Release Date, 3rd Line : Compression Type
*#9999# Phones software version if *#0000# does not work
*#06# For checking the International Mobile Equipment Identity (IMEI Number)
#pw+1234567890+1# Provider Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols)
#pw+1234567890+2# Network Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols)
#pw+1234567890+3# Country Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols)
#pw+1234567890+4# SIM Card Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols)
*#147# This lets you know who called you last (Only vodofone)
*#1471# Last call (Only vodofone)
*#21# This phone code allows you to check the number that "All Calls" are diverted to
*#2640# Displays phone security code in use
*#30# Lets you see the private number
*#43# Allows you to check the "Call Waiting" status of your cell phone.
*#61# Allows you to check the number that "On No Reply" calls are diverted to
*#62# Allows you to check the number that "Divert If Unreachable (no service)" calls are diverted to
*#67# Allows you to check the number that "On Busy Calls" are diverted to
*#67705646# Phone code that removes operator logo on 3310 & 3330
*#73# Reset phone timers and game scores
*#746025625# Displays the SIM Clock status, if your phone supports this power saving feature "SIM Clock Stop Allowed", it means you will get the best standby time possible
*#7760# Manufactures code
*#7780# Restore factory settings
*#8110# Software version for the nokia 8110
*#92702689# Displays - 1.Serial Number, 2.Date Made, 3.Purchase Date, 4.Date of last repair (0000 for no repairs), 5.Transfer User Data. To exit this mode you need to switch your phone off then on again
*#94870345123456789# Deactivate the PWM-Mem
**21*number# Turn on "All Calls" diverting to the phone number entered
**61*number# Turn on "No Reply" diverting to the phone number entered
**67*number# Turn on "On Busy" diverting to the phone number entered
12345 This is the default security code
press and hold # Lets you switch between lines


some other codes

*** WARNING: Using secret codes may be harmful to your phone and result in disabling or worse. Use these codes at your own discretion, we accept no responsiblility for blocked pones while using these codes!!!

IMEI Number
*#06# Cells Identity Code (IMEI = International Mobile Equipment Identity)
XXXXXX XX XXXXXX X
TAC FAC SNR SP

TAC = Type Approval Code (first 2 digits = country code of the approval-country )
FAC = Final Assembly Code: (01,02 = AEG)
(10,20 Nokia)
(40,41,44 Siemens)
(30 Ericsson)
(50 Bosch)
(51 Sony,Siemens,Ericsson)
(60 Alcatel)
(65 AEG)
(70 Sagem)
(75 Dancall)
(80 Philips)
(85 Panasonic)

SNR = Serial Nr.

SP = Spare (always "0")


Software Version
*#0000# shows the software version

Signal Processing
*3370# - Enchanced full Rate Codec (EFR) activation. It will automatically restart.
#3370# - Enchanced full Rate Codec (EFR) deactivation
*4720# - Half Rate Codec activation. It will automatically restart.
#4720# - Half Rate Codec deactivation

Enchanced Full Rate will give you much better sound quality when you enable it. The new Enhanced Full Rate CODEC adopted by GSM uses the ASELP (AlgebraicCode Excitation Linear Prediction) compression technology. This technology allows for much great voice quality in the same number of bits as the older Full Rate CODEC. The older technology was called LPC-RPE (Linear Prediction Coding with Regular Pulse Excitation). Both operate at 13 kilobits.(but you take up more space on the network, so they can charge you more) - Talk-time is reduced with about 5%

Sim Clock Stopping
*#746025625#
[*#sim0clock#]

Checks if the sim clock can be stopped. Sim clock stop is a kind of stand-by mode which will save battery time. This code doesn't work with software version 4.59.

It will tell you if it can be stopped or not

Enhanced Full Rate will give you much better sound quality when you enable it. The new Enhanced Full Rate CODEC adopted by GSM uses the ASELP (Algebraic Code Excitation Linear Prediction) compression technology. This technology allows for much great voice quality in the same number of bits as the older Full Rate CODEC. The older technology was called LPC-RPE (Linear Prediction Coding with Regular Pulse Excitation). Both operate at 13 kilobits.(but you take up more space on the network, so they can charge you more) - Talk-time is reduced by about 5% when using the ERF option.

Nokia 9000/9000i

To view IMEI number *#06#
To view Software Version enter *#8110# Latest Version is under Phone Info.
To view Week and Year of manufacture enter *#3283#

Offline *****

  • *
  • Posts: 205
  • Reputation : 3
Re: All About Nokia Secrets
« Reply #4 on: October 04, 2007, 08:45:44 AM »
Warrenty Menu
*#92702689# takes you to a secret menu with 6 choices:
[*#war0anty#]

1. Displays Serial Number.
2. Displays the Month and Year of Manufacture (0997).
3. Displays (if there) the date where the phone was purchased (MMYY).
4. Displays the date of the last repairment - if found (0000).
5. Makes you capable of transferring user data if you have the gear for it.
6. Shows how long the phone has been used to talk. This counter is not reset by when you "clear timers" like the counters in the call register.

Bypass the SP lock With a Nokia 16xx/21xx/31xx/51xx/81xx
1. Insert SIM card of different provider.
2. Turn on the phone and press the UP VOLUME key for 3 sec.
Then release it and the phone says PIN CODE?
3. Press the "C" key.
4. Then Press * and wait until it disappears and appears again, then press * one more time and 04*PIN*PIN*PIN#


Nokia Speed Trap Detector Urban Legend spread by Nokia Engineers ;^)
The settings for radar speed traps detector. Your Nokia cell phone can be programmed to pick up radar speed traps, when programmed your cell phone picks up the radar and alerts you on the message alert tone. ( Doesn't work with Nokia 7110! )
1. Enter your menu
2. Select settings
3. Select security settings
4. Select closed user group
5. Select on
6. Enter 00000
7. Press ok
8. Clear back to normal, within a few seconds your phone will display a radar sign with five zero's next to it. It is now activated.

Unfortunately only Nokia phones have this function. The Cell Phone info display needs to be de-activated. Settings -> Phone Settings -> Cell Info display. Each time you turn off your phone, or even each time you loose contact with your carrier, you'll have to activate it again... It is done using steps 1 through 5 above, but the number (00000) will be already on the field as a default


Network Monitor

Network Monitor
There is a hidden menu inside your Nokia phone. If you want to activate it, you'll have to re-program some chips inside of your phone.
Check your software version. You can only continue if you have v4.33, v4.73 or v5.24.
Take apart the phone.
De-solder the EEPROM (ATMEL AT 24C64)
Read out the data with an EEPROM programmer and save it to a file (Backup)
If you have v.33 or v4.73, change the address "03B8" from "00" to "FF"
If you have v5.24 then change the address "0378" from "00" to "FF"
Write the new data to the EEPROM and solder it back to the phone
Power on your phone and you should have "Netmonitor" enabled.
The Network Monitor gives you the following information:
Carrier number, MS RX Level in DBM, Received signal quality, MS TX power level, C1 (Path loss criterion, used for cell selection and reselection). The range is -99 to 99, RTL (Radio link timeout), Timeslot, Indication of the transmitter status, Information on the Network parameters, TMSI (Temporary Mobile Subscriber Identity), Cell identification (Cell ID, Number of cells being used), MCC (Mobile country code), MCN (Mobile network code), LAC (Location area code), Ciphering (On/Off), Hopping (On/Off), DTX (On/Off), Discard cell barred information.


GSM Network Services Command Strings
When various network functions are selected via the cellphone's menu using the keypad, the cellphone automatically generates the corresponding GSM network command string and transmits it to the network. These commands can however be manually entered via the keypad.

Each command is prefixed with either one or two * or # characters as follows:
** Register and Activate
* Activate
## De-Register (and Deactivate)
# Deactivate
*# Check Status
? Call button


Once each command has been entered, if it is a network command (as opposed to a local handset command) it must be transmitted to the network by pressing the YES (receiver) key which acts as an enter key - this is represented here with the ? character. Always enter numbers in full international format +CountryAreaNumber (e.g. +447712345678).

Command Description Command String
Security
Change call barring code **03*OldCode*NewCode*NewCode#?
Change call barring code **03*330*OldCode*NewCode*NewCode#?
Change PIN code **04*OldPIN*NewPIN*NewPIN#?
Change PIN2 code **042*OldPIN2*NewPIN2*NewPIN2#?
Unlock PIN code (when PIN is entered wrong 3 times) **05*PUK*NewPIN*NewPIN#?
Unlock PIN2 code (when PIN2 is entered wrong 3 times) **052*PUK2*NewPIN2*NewPIN2#?
Display IMEI *#06#
Call Forwarding (Diversions)
De-register all call diversions ##002#?
Set all configured call diversions to number and activate **004*number#?
De-register all configured call diversions (no answer, not reachable, busy) ##004#?
Unconditionally divert all calls to number and activate **21*number#?
Activate unconditionally divert all calls *21#?
De-register unconditionally divert all calls ##21#?
Deactivate unconditionally divert all calls #21#?
Check status of unconditionally divert all calls *#21#?
Divert on no answer to number and activate **61*number#?
Activate divert on no answer *61#?
De-register divert on no answer ##61#?
Deactivate divert on no answer #61#?
Check status of divert on no answer *#61#?
Divert on not reachable to number and activate **62*number#?
Activate divert on not reachable *62#?
De-register divert on not reachable ##62#?
Deactivate divert on not reachable #62#?
Check status of divert on not reachable *#62#?
Divert on busy to number and activate /td> **67*number#?<
Activate divert on busy *67#?
De-register divert on busy ##67#?
Deactivate divert on busy #67#?
Check status of divert on busy *#67#?
Change number of seconds of ringing for the given service before diverting a call (such as on no answer). Seconds must be a value from 5 to 30. De-registering the same divert will also delete this change! **service*number**seconds#? (Service numbers, see below)
Call barring


Activate call waiting *43*#?
Deactivate call waiting #43##?
Check status of call waiting *#43#?
Calling Line Identification
The following only works if CLIP and CLIR are enabled (ask your service provider)
CLIP: Presentation of the number of the incoming call
Activate CLIP **30#?
Deactivate CLIP ##30#?
Check status of CLIP *#30#?
CLIR: Presentation of one's own number to the to the called party
Activate CLIR **31#?
Activate CLIR for the actual call *31#number?
Deactivate CLIR ##31#?
Deactivate CLIR for the actual call #31#number?
Check status of CLIR *#31#?
COLP: Presentation of the actual number reached (if number called was diverted to another number
Activate COLP *76#?
Deactivate COLP #76#?
Check status of COLP *#76#?
COLR: Presentation of the original number called by the calling party (if the call was diverted to this cellphone)
Activate COLR *77#?
Deactivate COLR #77#?
Check status of COLR *#77#?


Cellphone Services
10 All types of cellphone services
11 Speech service
12 Data service
13 Fax
14 Datex-J
15 Teletex
16 Short message service (SMS)
18 All data services without SMS
19 All cellphone services without SMS


GSM Network Service Codes

Note that at present only the following service codes are in use:
11 Speech
13 fax
25 data


Cell Broadcast
While Short Message Service (SMS) can be configured as a personal service, Cell Broadcast is a general service which is designed for subscribers of a specific cell or topic. For example, a subscriber to cell 050 in England will receive information on the GSM tower currently being used by their phone. This new concept brings a whole new meaning to the term mobile communications as the phone is now able to receive information such as share prices or weather updates without the need of data cards and computers. At present the following message types exist (note: this may vary from carrier to carrier and some carriers may charge for this service):


Code Title
000 Index
010 Flashes
020 Hospitals
022 Doctors
024 Pharmacy
030 Long Distant Road Reports
032 Local Road Reports
034 Taxis
040 Weather
050 District
052 Network Information
054 Operator Services
056 Directory Inquiries (national)
057 Directory Inquiries (international)
058 Customer Care (national)
059 Customer Care (international)

Offline *****

  • *
  • Posts: 205
  • Reputation : 3
Re: All About Nokia Secrets
« Reply #5 on: October 04, 2007, 08:46:34 AM »
n the future one will be able to control each individual call by use of the following service codes. To do this the user has to insert the service code in front of the last # in the MMI command above.

For example the sequence *21*number*16# would divert all SMS calls (and only these) to the given number.

GSM Operator Codes
202-01 COSMOTE - Greece
202-05 Greece Panafon S A Panafon
202-10 Greece STET Hellas STET Hellas
204-04 KPN Telecom (GSM 900)
204-08 Libertel (GSM 900)
204-12 Telfort (GSM 1800)
204-16 Ben (GSM 1800)
204-20 Dutchtone (GSM 1800)
206-01 Belgium Belgacom BEL PROXI
206-10 Belgium Mobistar BEL mobistar
206-20 KPN Orange Belgium SA
208-01 France France Telecom F Itineris
208-01 Monaco France Telecom F Itineris
208-10 France SFR F SFR
208-10 Monaco SFR F SFR
208- France Bouygues Telecom Bouygues
213-03 Andorra STA Andorra AND M-AND
214-01 Spain Airtel Airtel
214-03 Spain AMENA
214-07 Spain Telefonica Moviles MSTAR
216-01 Hungary Pannon GSM Pannon
216-30 Hungary Westel H-Westel 900
216-70 Hungary Vodafone (GSM 900/1800)
218-01 Bosnia Cronet Cronet
218-90 Bosnia PTT Bosnia BIH PTT-GSM
219-01 Croatia HPT Croatian PTT HR-CRONET
219-10 Croatia VIPNET
220-01 Serbia Mobile Telecomm. MOBTEL
220-03 YU PTT
220-02 Montenegro PROMONTE GSM
220-04 Montenegro MoNet GSM
220-07 Serbia Promonte PROMONTE GSM
222-01 Italy Telecom Italia Mobile TIM
222-01 San Marino Telecom Italia Mobile TIM
222-01 The Vatican Telecom Italia Mobile TIM
222-10 Italy Omnitel Pronto Italia Omni
222-10 San Marino Omnitel Pronto Italia Omni
222-10 The Vatican Omnitel Pronto Italia Omni
222-88 Wind Telecomunicazioni S.P.A, Vatican and San Marino, Italy
222-98 Blu s.p.a. Telefonia mobile Italy
226-01 Romania MobiFon
226-03 Romania Cosmorom


-------------------------------------------------------------------------------------------

Some Tips

Problems with sending files from 7650 to PC via BT
The following tip can be useful for people using Bluetooth hardware (cards, dongles) equipped with Widcomm software (MSI, TDK etc).

If you cannot send files from your Nokia to PC, you may want to try the following tip:


Open your Windows registry in Registry editor: Menu Start -> Run -> Regedit

locate HKEY_CURRENT_USER\Software\Widcomm\BTConfig\Servic es\0004 key

locate AcceptOther entry

change its value from 0 to 1

reboot your computer.


-------------------------------------------------------------------------------------------

Howto] Backup one MMC to another MMC

Backup one MMC to another MMC Back Up one MMC to another MMC

Needed Items
1 MMC Reader
1 Cell w/ MMC Ability
1 New MMC
1 Old MMC
1 PC

How To Do it
1.) look at the name the first MMC is named and then take it out
2.) put in the new MMC
3.) format and name the new MMC the same as the other one
4.) Take back out the New MMC
5.) put the old MMC into a MMC Reader that is connected to your PC
6.) Coppy all of the MMC *make sure you have "show hidden files" enabled on your PC. see aditional info for this setting at the bottom of this message*
7.) Make a new folder on your Desktop and Past all files into that folder.
8.) Take out the Old MMC and Insert the new MMC into the Reader
9.) Open the new folder on your Desktop
10.) Highlight all of these files and folders, right click on one of the files or folders, select "Coppy"
11.) "Past" files and folders to the New MMC
12.) put the New MMC back into the cellphone, power up, and your done.


How To View Hidden Files in MS Windows
To view hidden files in Microsoft Windows perform the below steps.

1.) Open explorer
2.) Click the "Tools" drop down menu.
3.) Click either "Folder Options" or "Options".
4.) Click the "View" tab.
5.) Within the view tab select the option "Show hidden files and folders".



-------------------------------------------------------------------------------------------

Q: Which Symbian OS version does my phone use?
A: 3600/3620/3650/3660/7650/N-Gage/N-Gage QD are using v6.1; 6260/6600/6620/6670/7610 are using v7.0s; 6630 uses Symbian OS 8.0

Q: How can I upgrade my Symbian OS to a newer version?
A: You can't.

Q: How do I format my phone?
A: - Normal Reset (*#7780#) : Restores ini files from rom but preserves user data (photos, 3rd party apps etc)
- Deep Reset (*#7370#) : This reformats completely the C: drive. All applications and files stored on this drive will be lost and clean default files will be rewritten.

In both case, the phone will ask you a confirmation and you will have to enter a security code (12345 by default).

Files and applications stored on E: drive are not be affected by these sequences.

For Symbian OS 7 (6260/6600/6620/6670/7610) there is a third method:
Turn phone off, press and hold the green (talk) key on the left + number 3 on the keypad + the * key and then turn the phone back on.

The phone will start the formatting process without confirmation!
Files and applications stored on E: drive are not be affected by this.

Q: How do I get the MAC adress of the bluetooth device of my phone?
A: *#2820#

Q: My phone reacts quite slow, how can I speed it up?
A: You can speed up the phone by setting the time of the "Recent calls register" to one day (30 days by default). It depends on you how important the "Recent calls register" is for you.



-------------------------------------------------------------------------------------------

1)What's the difference between the N-Gage and QD?
In order to know their differences, let's compare their specs:

Original N-Gage
- Triband (900/1800/1900)
- 4096 colourscreen
- Stereo (comes with stereo headset)
- Comes with a USB cable, recording cable and adaptor cable (for recording radio/MP3 purposes)
- Built in MP3 player and radio
- side-talking
- Must turn off the phone, remove the battery cover AND battery in order to remove MMC
- 5-way direction pad (CENTER for menu selection)
- Comes with BL-5C battery
- MP3, AAC, MIDI or WAV ringtones
- Great RF

N-Gage QD
- Dualband (850/1900 or 900/1800)
- 4096 colourscreen (brighter than Original N-Gage)
- Mono (comes with dual mono headset)
- Doesn't come with ANY cables
- NO built in MP3 player or radio (will still be able to listen to mp3's thru 3rd party apps)
- NO side-talking
- Hot-swop, easy removal of MMC
- 4-way direction pad with a separate "menu selection" key
- Comes with BL-6C battery
- MIDI or WAV ringtones
- Great RF (better than Original N-Gage if 850 is being used)

(2) Which N-Gage is better?
It's really hard to say because everyone has their own opinions. But if you are looking function-wise the original N-Gage wins out with the stereo support, MP3 ringtones, radio, tri-band and additional cables/recording functions. But the QD counters with its 850 (for those 850 gurus), smaller-size, no side-talking, BL-6C battery(for extra battery life)and the easy removal of MMC.

(3) Can my (input s60 phone here) play N-Gage games? Where/How can I find ******* N-Gage games for my (input s60 phone here)?
Yes your s60 phone can play N-Gage games. How and where? according to forum rules, I am not allow to tell. Sorry.

(4) How do I check firmware and IMEI on my N-Gage/QD?
Press *#0000# on the main screen for firmware, and *#06# for IMEI.

(5) How do I change my operator logo for my N-Gage/QD?
Download SeleQ or FExplorer from mysymbian.com, access the image thru either of the apps and select "Set as Operator Logo". If that doesn't work, SMS yourself or download an older format logo (black and white), and then save that logo. After that, you should be able to change your operator logo thru SeleQ or FExplorer.

(6) How do I change my wallpaper on my N-Gage/QD?
1) Press the application key
2) Scroll to the "Tools" folder and open it
3) Scroll to "Settings" and open it
4) Select "Phone/Device" (whichever your phone may say)
5) Select "Standby Mode"
6) Select "Background Image"
7) Select "Yes"
Select either "Phone Memory" or your MMC card depending on where the image is saved
9) Select the image
10) Go back to your main screen of the phone



-------------------------------------------------------------------------------------------

How to connect your N-Gage to your PC

Step 1.
Before you do anything. Place your MMC into your phone and format it.

Step 2.
Place the N-Gage disc (that comes with the phone) into your cd rom.

If youve got XP: Connect your N-Gage to your pc with the USB cable. Leave windows to find all the necessary drivers automatically. Your MMC in your N-Gage will now be recognised as a removeable drive in 'My Computer'.

If you havent got XP: Do the same as above. If nothing happens, run the program on the N-Gage disc and install any drivers you find.

If any of the above does not work click Here

Step 3.
Once the MMC is recognised by your PC, simply drag and drop any files you want onto the MMC (removeable drive).

Step 4.
Download FExplorer from HERE and place the file on your MMC.
Once on the MMC go to your menu then Tools --> Manager --> FExplorer --> Options --> Install

Follow all the on screen intructions. This has installed a file browser for you N-Gage. You can now access all the files on your N-Gage and MMC which 'Manager' can't see (like Java games).

Offline haku Black

  • alchi ko pinda
  • *
  • Posts: 19535
  • Reputation : 10
  • Gender: Male
  • nepali
    • sports unlimited
POST OF THE DAY for October 05,2007
« Reply #6 on: October 05, 2007, 07:38:30 AM »
POST OF THE DAY for October 05,2007

for others day post of the day please visit
http://www.forum.welovenepal.com/index.php?topic=4838.00

Offline ангел

  • Life 'N' aиg3l
  • *
  • Posts: 40215
  • Reputation : 204
  • Gender: Female
  • luv is like a heaven but hurts like a hell
    • http://samiel4ever.blogspot.com
Re: All About Nokia Secrets
« Reply #7 on: May 07, 2008, 02:19:20 AM »
wow great INf.
It Only Takes a Few Seconds To Hurt people You Love & It Can Take Years To Heal

Kharane

  • Guest
Re: All About Nokia Secrets
« Reply #8 on: May 07, 2008, 01:12:54 PM »
Ramro cha
Maile pahile ni Print out nikalera rakheko chu :p

Offline ангел

  • Life 'N' aиg3l
  • *
  • Posts: 40215
  • Reputation : 204
  • Gender: Female
  • luv is like a heaven but hurts like a hell
    • http://samiel4ever.blogspot.com
Re: All About Nokia Secrets
« Reply #9 on: May 07, 2008, 07:37:55 PM »
aafulai ni printout gari rakha ..kam lagcha :P
It Only Takes a Few Seconds To Hurt people You Love & It Can Take Years To Heal

Offline Nepali_gal

  • *
  • Posts: 1247
  • Reputation : 12
Re: All About Nokia Secrets
« Reply #10 on: June 30, 2008, 07:05:28 PM »
ty ****** :)
tara mero ta battery nai low huncha ajkal ta kati chado :@

Kharane

  • Guest
Re: All About Nokia Secrets
« Reply #11 on: June 30, 2008, 07:12:01 PM »
Change garideu na 24 ghanta chalcha hola aani :P

Offline ангел

  • Life 'N' aиg3l
  • *
  • Posts: 40215
  • Reputation : 204
  • Gender: Female
  • luv is like a heaven but hurts like a hell
    • http://samiel4ever.blogspot.com
Re: All About Nokia Secrets
« Reply #12 on: June 30, 2008, 08:50:11 PM »
k change garni?
It Only Takes a Few Seconds To Hurt people You Love & It Can Take Years To Heal

Kharane

  • Guest
Re: All About Nokia Secrets
« Reply #13 on: June 30, 2008, 09:21:08 PM »
Battery ni aaba purany bhayo bhanisincha Dadi ma le aani :p

Offline ангел

  • Life 'N' aиg3l
  • *
  • Posts: 40215
  • Reputation : 204
  • Gender: Female
  • luv is like a heaven but hurts like a hell
    • http://samiel4ever.blogspot.com
Re: All About Nokia Secrets
« Reply #14 on: June 30, 2008, 09:36:20 PM »
lolz :mare:
It Only Takes a Few Seconds To Hurt people You Love & It Can Take Years To Heal

 


Host By::Love Nepal Network SMF 2.0.2 | SMF © 2011, Simple Machines Our Privacy Policy & Terms of Use